CBP-PROC1 Instrumentation Calibration Bench

New range of CalBench Packages launched – View here

The CBP-PROC1 CalBench is a package that provides users with the capabilities to perform rapid calibration of process, temperature and pressure instrumentation. It is an ideal solution for instrument workshops that require a high performance workstation as the platform for calibration of plant devices and instruments.

The system features the 8060+ module situated centrally in the console for calibration and communication. It provides source, simulation and measurement of process signals, HART communication and 24 V loop power. It also includes an integral 6.5 digit multimeter, and a PC control centre with 12.1" touch screen display. The control centre has manual control applications and EasyCal software for automated calibration and test management. EasyCal communicates with pressure modules and dry block calibrators.

The modules and accompanying products work together to enable users to setup and run testing applications quickly and efficiently. In addition to wide workload coverage, the CalBench provides an organised workspace and a central system for calibration, quality control and management. It can also be utilised for training of instrumentation technicians and engineers. The package can be customised to match site requirements, change pressure ranges or exchange dry block calibrators for different models.

Features

Advanced instrumentation calibration bench
Process calibrator/multimeter/PC module
Source/measure V, I , Ω, frequency & more
Simulate & measure RTDs, thermocouples
Calibrate pneumatic, DP, hydraulic pressure
Includes 2 dry block calibrators
Pumps, manifolds, fittings, UUT stand
Fixed & variable DC power supply modules
Temperature interface module for batch TC calibration
Automated calibration using EasyCal software

Pressure Calibration

For pressure an automatic controller module is used for pneumatic calibration from vacuum to 20 bar. A selection of precision measurement modules providing range coverage to 700 bar. Additionally dedicated differential pressure modules enable low range DP calibration. Accompanying pneumatic and hydraulic pumps are supplied. Calibrate pressure instrumentation such as:

Analogue and digital gauges, indicators, manometers
Calibrators, sensors, transducers, transmitters
Switches, valves, controllers, chart recorders

Temperature Calibration

The CBP-PROC1 enables users to perform efficient calibration of temperature instrumentation. EasyCal can control the supplied dry block calibrators whilst reading back the temperature measurement of the sensor under test on the 8060 module. Additionally the 7085A scanner module enables multi-channel measurements to be performed. Calibrate various products including:

Sensors, transmitters, indicators, thermometers
RTDs, thermocouples, recorders, controllers
Process calibrators, PRTs, thermistors

Additional Applications

The CBP-PROC1 is a primarily a process instrumentation calibration system, but can also be used to check and verify functions on electrical test equipment and other devices. The CalBench is also ideal for training and can show a wide range of testing applications common to industries.

Test process calibrators, mV/mA meters, decade boxes, flow totalizers
Calibrate DP flow transmitters, pulse meters, tachometers, counters
Train engineers & technicians instrumentation calibration
Run a complete calibration program with EasyCal software

EasyCal Calibration Software

The CBP-PROC1 comes with EasyCal software on the 8060 control centre. This enables software driven testing procedures and provides increased speed of calibration and consistency of results.

Produce traceable calibration certificates and test reports for quality standards with additional uncertainty information for ISO 17025 conformance.

Details

Bench Type and Fittings

Item	Qty	Code	Basic Description	Basic Purpose
1	1	7080-HD	CalBench Heavy Duty Version (W 2000 x D 850 x H 1568 mm) Framework bench style with worktop, perforated panel, primary console with 7082 mains power controller module.	Provides an ergonomic workspace for various applications. Modules are fitted to the primary console for the necessary workload.
2	1	7137	Perfo Panel Option: 40 piece Tool Hook Kit	For holding various tools and accessories.
3	1	7139	Perfo Panel Option: Shelf (W 450 x D 250 x H 130 mm)	Suitable for storing equipment and tools.
4	1	7133	Magnet Set for Perfo Panel (10 x round, 10 x hook type)	For securing documents and small tools to perfo panel.
5	1	7132	5 Drawer Unit (W 525 x D 550 x H 600 mm)	For storage of equipment, tools, documents, etc.
6	3	7134	Slotted Divider Kit for inside of drawer units	Partitions the drawer units for parts and components.
7	1	7123	Under bench CPU/Dry Block Calibrator Holder	For storing a dry block calibrator when not in use.

Modules

Item	Qty	Code	Basic Description	Basic Purpose
8	1	8060+	Multifunction Process Calibrator and Control Centre Module Advanced system package for precision source and measure capabilities. Integral process calibrator, 6.5 digit multimeter, PC and EasyCal software. Operation via 12.1 ” touch screen display. Built-in communication with compatible modules.	Source and measure process signals for electrical, frequency, temperature. Enables users to calibrate process instrumentation like transmitters, RTDs, thermocouples and more. EasyCal software and accessories included for automation, administration and certificate generation.
9	1	CCPAD	Control Centre Numeric Keypad Module with jog dial	Provides an ergonomic method of using the control centre module without mouse or keyboard.
10	1	8030B/G20b/CV2b/BARO	Automatic Pressure Calibrator Module with multiple ranges Sensor 1: 0 to 20 bar (300 psi), 0.01 % FS accuracy. Sensor 2: Vacuum to 2 bar (30 psi), 0.01 % FS accuracy. Sensor 3: Barometric Reference.	For automated pneumatic pressure calibration of gauges, transmitters etc. Auto-ranging capabilities across 2 sensors from vacuum to 20 bar (300 psi). Absolute pressure emulation with barometric reference. Supplied with contamination trap & hoses.
11	1	RMTEG-G200b/0.02	Digital Pressure Gauge Module with Regulator 0 to 200 bar (3000 psi), 0.02 % FS accuracy.	For high range pneumatic calibration work, with a line supply typically from a gas cylinder to enable regulator adjustment.
12	1	XTEG-G700b/0.02/M	Pressure Measurement Module with Control Centre Interface 0 to 700 bar (10,000 psi), 0.02 % FS accuracy.	For hydraulic calibration with accompanying 7195 benchtop pump.
13	1	XTEG-G100b/0.02/M	Pressure Measurement Module with Control Centre Interface 0 to 100 bar (1500 psi), 0.02 % FS accuracy.	For high range pressure calibration work, commonly used with supplied pneumatic pump.
14	1	XTEG-CV2b/0.02/M	Pressure Measurement Module with Control Centre Interface Vacuum to 2 bar (30 psi), 0.02 % FS accuracy.	For low range pressure calibration. Used with pump or T-piece method from controlled output module.
15	1	XTEG-DP700mb/0.02/M	Differential Pressure Measurement Module 0 to ± 700 mbar (10 psi), 0.02 % FS accuracy.	For differential pressure calibration of transmitters etc. Used with 7191 pneumatic pump for fine control input.
16	1	XTEG-DP250mb/0.02/M	Differential Pressure Measurement Module 0 to ± 250 mbar (3.6 psi), 0.02 % FS accuracy.	For low range differential pressure calibration of transmitters etc. Used with 7191 pneumatic pump for fine control input.
17	1	7085A	Auto Switching Temperature Distribution Module	Connection module to enable batch testing of temperature devices like thermocouples.
18	1	7052	30 V DC 3 A Adjustable Power Supply Module - Digital	A variable DC supply to supplement various applications.
19	1	7087	Quad DC Power Supply Module 6 V (20 A), 12 V (10 A), 24 V (6 A), 48 V (3 A).	Provides a DC power supply to various instrumentation and devices under test.

Accompanying Products & Extras

Item	Qty	Code	Basic Description	Basic Purpose
20	1	7149	Electrical Vacuum Pump	Provides a vacuum for pressure modules.
21	1	7149-HCO	Housing & Connectivity Option for 7149 vacuum pump	Compact housing for the 7149 pump, situated under bench. Sound-proofed and power on/off via 7082 module on CalBench.
22	1	7195	Benchtop Hydraulic Pressure Calibration Pump Vacuum to 700 bar (10,000 psi).	Used for hydraulic pressure calibration with measurement modules.
23	1	7194A	Benchtop Pneumatic High Pressure Calibration Pump Vacuum to 200 bar (3,000 psi).	Pressure generation to 200 bar, suitable for use with pressure modules when compressed air source is not available.
24	1	7191	Pneumatic Benchtop Pump Vacuum to 4 bar (60 psi).	Enables precise, fine control input of low pressure for pneumatic work. Suitable for use with XTEG measurement modules.
25	1	7161P	Quad Port Benchtop Manifold For Pneumatic use from vacuum to 200 bar (3000 psi).	Pneumatic manifold that provides four output ports with hand-tight connectors for pressure instrumentation under test.
26	1	7198	Pressure Calibration Accessories Kit A comprehensive selection of fittings, adaptors and hoses.	Provides all the required pressure connections and fittings for modules and pumps to UUTs.
27	1	8100	Benchtop Instrumentation Test Stand	For fast and ergonomic positioning of UUTs like transmitters & gauges on the CalBench worktop.
28	1	8072	Dry Block Calibrator (28 to 660 °C) With metric multi hole insert (1x3, 2x4, 1x5, 1x6, 1x9 mm), blank insert, EasyCal software driver pre-configured on control centre.	Temperature source for the calibration of probes, RTDs, and thermocouples. Manual control and EasyCal software compatible to automate calibration applications.
29	1	8072-METP	Pack of 16 Metric Inserts for 8072 3 mm to 20 mm holes	Inserts for use with different probe sizes, used with 8072.
30	1	8073	Dry Block Calibrator (100 to 1205 °C) With metric multi hole insert (3, 4, 6 mm), blank insert, EasyCal software driver pre-configured on control centre.	Temperature source for the calibration of thermocouples and sensors. Manual control and EasyCal software compatible to automate calibration applications.
31	1	8073-METP	Pack of 10 Metric Inserts for 8073 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 mm	Inserts for use with different probe sizes, used with 8073
32	1	8002	CalBench Environmental Monitoring System With magnetic rear for perfo panel mounting.	Measures and logs temperature, relative humidity and barometric pressure, with control centre interface.
33	1	CERTS	Traceable Calibration Certificates For all test modules and additional test equipment.	Certifies all measurement modules and additional instruments have been tested in the TE factory to international standards.

Downloads

File Name	File Size	Language	Format
CBP-PROC1 CalBench Package Data Sheet	630 kB	EN	PDF

CalBench Packages Brochure

11.5 MB

PDF

CBP-PROC1 CalBench Package

Features

Pressure Calibration

Temperature Calibration

Additional Applications

EasyCal Calibration Software

Details

CalBench Heavy Duty Version (W 2000 x D 850 x H 1568 mm)

Magnet Set for Perfo Panel (10 x round, 10 x hook type)

5 Drawer Unit (W 525 x D 550 x H 600 mm)

Slotted Divider Kit for inside of drawer units

Under bench CPU/Dry Block Calibrator Holder

Multifunction Process Calibrator and Control Centre Module

Control Centre Numeric Keypad Module with jog dial

Automatic Pressure Calibrator Module with multiple ranges

Digital Pressure Gauge Module with Regulator

Pressure Measurement Module with Control Centre Interface

Pressure Measurement Module with Control Centre Interface

Pressure Measurement Module with Control Centre Interface

Differential Pressure Measurement Module

Differential Pressure Measurement Module

Auto Switching Temperature Distribution Module

30 V DC 3 A Adjustable Power Supply Module - Digital

Quad DC Power Supply Module

Electrical Vacuum Pump

Housing & Connectivity Option for 7149 vacuum pump

Benchtop Hydraulic Pressure Calibration Pump

Benchtop Pneumatic High Pressure Calibration Pump

Pneumatic Benchtop Pump

Quad Port Benchtop Manifold

Pressure Calibration Accessories Kit

Benchtop Instrumentation Test Stand

Dry Block Calibrator (28 to 660 °C)

Pack of 16 Metric Inserts for 8072

Dry Block Calibrator (100 to 1205 °C)

Pack of 10 Metric Inserts for 8073

CalBench Environmental Monitoring System

Traceable Calibration Certificates

Downloads

Request a price quote

CBP-PROC1 CalBench Package

Related Products

CBP-PROC1B CalBench Package

CBP-PROC2 CalBench Package

CBP-PROC3 CalBench Package

CBP-PRES1 CalBench Package