CBP-PROC3 Instrumentation Test Bench

New range of CalBench Packages launched – View here

The CBP-PROC3 CalBench is a package for testing and calibrating pressure, process, and temperature instrumentation. It is suitable for users that require a workstation that is easy to operate manually, but can also perform software driven calibration applications. This makes it an ideal solution for all skill levels, from technicians learning calibration, to experienced test engineers.

The 8060+ module situates centrally in the console, providing source, simulation and measurement of process signals, HART communication and 24 V loop power. It features an integral multimeter, and a PC control centre with 12.1" touch screen display. Both manual control and EasyCal software driven calibration can be performed. EasyCal communicates with pressure modules and dry block calibrators.

For pressure calibration, high accuracy digital gauge modules feature. For pneumatic workload two gauge modules have regulators for output adjustment and setting. For higher pressures gauge only modules are used with supplied pumps.

The package has various extras to aid applications and complete the workspace. These include on-bench storage with drawers, holders, perfo panel hooks and shelves. Calibration accessories include pumps, manifold, adaptors/fittings kit, and test stand.

Features

Instrumentation test & trainer bench
Process calibrator/multimeter/PC module
Source/measure V, I , Ω, Hz, temperature
Regulated calibrator modules to 20 bar
Digital gauge modules for 200 & 700 bar
Fixed & variable DC power supply modules
Pumps, manifold, dry block calibrator
Comprehensive pressure fittings/adaptors kit
Configurable instrumentation test stand
Automated calibration using EasyCal software

Temperature Calibration

The CBP-PROC3 enables users to perform efficient calibration of temperature instrumentation. EasyCal can control the dry block calibrator whilst reading back the temperature measurement of the sensor under test on the 8060 module. Calibrate various products including:

Sensors, transmitters, indicators, thermometers
RTDs, thermocouples, recorders, controllers
Process calibrators, PRTs, thermistors

Pressure Calibration

The CalBench features four main pressure modules for calibration work. These include two regulated calibrator modules covering vacuum to 20 bar (300 psi), utilised with line pressure. Two digital gauge modules for 200 bar (3000 psi) and 700 bar (10,000 psi) are used with the supplied pneumatic and hydraulic pumps. Calibrate pressure instrumentation such as:

Analogue and digital gauges, indicators, manometers
Calibrators, sensors, transducers, transmitters
Switches, valves, controllers, chart recorders

Additional Applications

The CBP-PROC3 is a primarily a process instrumentation calibration system, but can also be used to check and verify functions on electrical test equipment and other devices. The CalBench is also ideal for training and can show a wide range of testing applications common to industries.

Test process calibrators, mV/mA meters, decade boxes, flow totalizers
Calibrate DP flow transmitters, pulse meters, tachometers, counters
Train engineers & technicians instrumentation calibration
Run a complete calibration program with EasyCal software

EasyCal Calibration Software

The CBP-PROC3 comes with EasyCal software on the 8060 control centre. This enables software driven testing procedures and provides increased speed of calibration and consistency of results.

Produce traceable calibration certificates and test reports for quality standards with additional uncertainty information for ISO 17025 conformance.

Details

Bench Type and Fittings

Item	Qty	Code	Basic Description	Basic Purpose
1	1	7080-HD	CalBench Heavy Duty Version (W 2000 x D 850 x H 1568 mm) Framework bench style with worktop, perforated panel, primary console with 7082 mains power controller module.	Provides an ergonomic workspace for various applications. Modules are fitted to the primary console for the necessary workload.
2	1	7125	Perfo Panel Option: 20 piece Tool Hook Kit	For holding various tools and accessories.
3	1	7139	Perfo Panel Option: Shelf (W 450 x D 250 x H 130 mm)	Suitable for storing equipment and tools.
4	1	7141	Perfo Panel Option: Storage Bin Strip (W 450 x H 75 mm) Supplied with 4 x 1 L bins.	For storage of components and small tools.
5	1	7124	4 Drawer Unit (W 525 x D 550 x H 600 mm)	For storage of equipment, tools, documents etc.
6	1	7123	Under bench CPU/Dry Block Calibrator Holder	For storing a dry block calibrator when not in use.

Modules

Item	Qty	Code	Basic Description	Basic Purpose
7	1	8060+	Multifunction Process Calibrator and Control Centre Module Advanced system package for precision source and measure capabilities. Integral process calibrator, 6.5 digit multimeter, PC and EasyCal software. Operation via 12.1 ” touch screen display. Built-in communication with compatible modules.	Source and measure process signals for electrical, frequency, temperature. Enables users to calibrate process instrumentation like transmitters, RTDs, thermocouples and more. EasyCal software and accessories included for automation, administration and certificate generation.
8	1	CCPAD	Control Centre Numeric Keypad Module with jog dial	Provides an ergonomic method of using the control centre module without mouse or keyboard.
9	1	RMTEG-CV7b/0.02	Digital Pressure Gauge Module with Regulator Vacuum to 7 bar (100 psi), 0.02 % FS accuracy.	For pneumatic calibration work from vacuum to 7 bar (100 psi), commonly used with the 7149 electrical vacuum pump and external air supply (9 bar / 130 psi). Can be used manually with pump also.
10	1	RMTEG-G20b/0.02	Digital Pressure Gauge Module with Regulator 0 to 20 bar (300 psi), 0.02 % FS accuracy.	For pneumatic calibration work up to 20 bar (300 psi), requires a line supply (24bar / 350 psi) typically from a gas cylinder, to enable setting of output with regulator. Can be used manually with pump also.
11	1	MTEG-G200b/0.02	Digital Pressure Gauge Module 0 to 200 bar (3000 psi), 0.02 % FS accuracy.	For high range pneumatic pressure calibration work, used with supplied benchtop pump.
12	1	MTEG-G700b/0.02	Digital Pressure Gauge Module 0 to 700 bar (10,000 psi), 0.02 % FS accuracy.	For hydraulic calibration with accompanying 7195 benchtop pump.
13	1	7056	Dual Adjustable DC Power Supply Module 2 x 30 V DC 3 A.	A variable DC supply to supplement various applications.
14	1	7087	Quad DC Power Supply Module 6 V (20 A), 12 V (10 A), 24 V (6 A), 48 V (3 A).	Provides a DC power supply to various instrumentation and devices under test.

Accompanying Products & Extras

Item	Qty	Code	Basic Description	Basic Purpose
15	1	7149	Electrical Vacuum Pump	Provides a vacuum for pressure modules.
16	1	7149-HCO	Housing & Connectivity Option for 7149 vacuum pump	Compact housing for the 7149 pump, situated under bench. Sound-proofed and power on/off via 7082 module on CalBench.
17	1	7161-VLP	Dual Port Benchtop Manifold with Vernier For Pneumatic use from vacuum to 40 bar (600 psi).	Compact pneumatic manifold that provides two output ports. Hand-tight connectors for pressure instrumentation under test.
18	1	7115	Contamination Trap For pneumatic use from vacuum to 200 bar (3000 psi).	Contamination trap to protect pressure calibrators and controllers against impurities and residues released by pressure instrumentation under test.
19	1	7195	Benchtop Hydraulic Pressure Calibration Pump Vacuum to 700 bar (10,000 psi).	Used for hydraulic pressure calibration with measurement modules.
20	1	7194A	Benchtop Pneumatic High Pressure Calibration Pump Vacuum to 200 bar (3,000 psi).	Pressure generation to 200 bar, suitable for use with pressure modules when compressed air source is not available.
21	1	7198	Pressure Calibration Accessories Kit A comprehensive selection of fittings, adaptors and hoses.	Provides all the required pressure connections and fittings for modules and pumps to UUTs.
22	1	8100	Benchtop Instrumentation Test Stand	For fast and ergonomic positioning of UUTs like transmitters & gauges on the CalBench worktop.
23	1	8072	Dry Block Calibrator (28 to 660 °C) With metric multi hole insert (1x3, 2x4, 1x5, 1x6, 1x9 mm), blank insert, EasyCal software driver pre-configured on control centre.	Temperature source for the calibration of probes, RTDs, and thermocouples. Manual control and EasyCal software compatible to automate calibration applications.
24	1	8072-METP	Pack of 16 Metric Inserts for 8072 3 mm to 20 mm holes	Inserts for use with different probe sizes, used with 8072.
25	1	CERTS	Traceable Calibration Certificates For all test modules and additional test equipment.	Certifies all measurement modules and additional instruments have been tested in the TE factory to international standards.

Downloads

File Name	File Size	Language	Format
CBP-PROC3 CalBench Package Data Sheet	612 kB	EN	PDF

CalBench Packages Brochure

11.5 MB

PDF

Features

Temperature Calibration

Pressure Calibration

Additional Applications

EasyCal Calibration Software

Details

CalBench Heavy Duty Version (W 2000 x D 850 x H 1568 mm)

Perfo Panel Option: 20 piece Tool Hook Kit

4 Drawer Unit (W 525 x D 550 x H 600 mm)

Under bench CPU/Dry Block Calibrator Holder

Multifunction Process Calibrator and Control Centre Module

Control Centre Numeric Keypad Module with jog dial

Digital Pressure Gauge Module with Regulator

Digital Pressure Gauge Module with Regulator

Digital Pressure Gauge Module

Digital Pressure Gauge Module

Dual Adjustable DC Power Supply Module

Quad DC Power Supply Module

Electrical Vacuum Pump

Housing & Connectivity Option for 7149 vacuum pump

Dual Port Benchtop Manifold with Vernier

Contamination Trap

Benchtop Hydraulic Pressure Calibration Pump

Benchtop Pneumatic High Pressure Calibration Pump

Pressure Calibration Accessories Kit

Benchtop Instrumentation Test Stand

Dry Block Calibrator (28 to 660 °C)

Pack of 16 Metric Inserts for 8072

Traceable Calibration Certificates

Downloads

Request a price quote

CBP-PROC3 CalBench Package

Related Products

CBP-PROC1 CalBench Package

CBP-PROC2 CalBench Package

CBP-PRES3 CalBench Package

CBP-WW3 CalBench Package