CBP-WW4 Wide Workload Calibration Test Bench

New range of CalBench Packages launched – View here

The CBP-WW4 CalBench is a package for testing and calibrating electrical, pressure, and temperature instrumentation. The selection of modules and accompanying products provide users with a flexible and high performance workstation. It can be operated manually or utilised for software driven calibration.

The 8060+ module situates centrally in the console, providing source, simulation and measurement of process signals, HART communication and 24 V loop power. It features an integral multimeter, and a PC control centre with 12.1” touch screen display. EasyCal software is pre-loaded and communicates with pressure modules and the dry block calibrator, enabling automated calibration and test management. The 5025E benchtop multifunction calibrator connects to the control centre, and provides a solution for calibrating engineer test tools like multimeters and clamp meters.

For pressure calibration, high accuracy digital gauge modules feature. For pneumatic workload a regulated module is used for vacuum to 7 bar. An electrical vacuum pump is supplied, and line pressure is typically from plant/shop air. For higher pressures gauge only modules are used with supplied pneumatic and hydraulic pumps. Further modules include fixed and variable DC and AC power supplies, and control centre operated scope and function generator modules. Storage is provided by an under bench drawer unit, perfo panel hooks, shelf, and parts bins. Calibration accessories include a pressure manifold, adaptors set, and dry block calibrator.

Features

Instrument & electrical CalBench package
Process calibrator/multimeter/PC module
Source/measure V, I , Ω, Hz, temperature
Benchtop electrical multifunction calibrator
Regulated pressure calibrator module
3 precision pressure measurement modules
Oscilloscope & function generator modules
Fixed and variable DC power supply modules
Variable AC power supply module
Dry block calibrator for up to 660 °C
Pneumatic & hydraulic pumps, manifold, adaptor set
EasyCal calibration software, peripherals supplied

Pressure Calibration

The CBP-WW4 features four main pressure modules for calibration work. These include a regulated module covering vacuum to 7 bar (100 psi), utilised with line pressure. Three precision measurement modules provide further calibration coverage for 20 bar (300 psi), 100 bar (1500 psi) and 700 bar (10,000 psi). These are used with the supplied pneumatic and hydraulic pumps. Calibrate pressure instrumentation such as:

Analogue and digital gauges, indicators, manometers
Calibrators, sensors, transducers, transmitters
Switches, valves, controllers, chart recorders

Electrical Calibration

The package includes electrical sourcing functionality with the 5025E multifunction calibrator, and modules for measurement applications. It provides users with automated calibration capabilities to cover a wide range of electrical and electronic equipment including:

Multimeters, analogue meters, clamp meters, data loggers
Calibrators, decade boxes, conductance meters, tachometers
Power meters, watt meters, power supplies

Temperature Calibration

The CBP-WW4 enables users to perform efficient calibration of temperature instrumentation. EasyCal can control the dry block calibrator whilst reading back the temperature measurement of the sensor under test on the 8060 module. Calibrate various products including:

Sensors, transmitters, indicators, thermometers
RTDs, thermocouples, recorders, controllers
Process calibrators, PRTs, thermistors

EasyCal Calibration Software

The CBP-WW4 comes with EasyCal software on the 8060 control centre. This enables software driven testing procedures and provides increased speed of calibration and consistency of results.

Produce traceable calibration certificates and test reports for quality standards with additional uncertainty information for ISO 17025 conformance.

Details

Bench Type and Fittings

Item	Qty	Code	Basic Description	Basic Purpose
1	1	7080-HD	CalBench Heavy Duty Version (W 2000 x D 850 x H 1568 mm) Framework bench style with worktop, perforated panel, primary console with 7082 mains power controller module.	Provides an ergonomic workspace for various applications. Modules are fitted to the primary console for the necessary workload.
2	1	7125	Perfo Panel Option: 20 piece Tool Hook Kit	For holding various tools and accessories.
3	1	7139	Perfo Panel Option: Shelf (W 450 x D 250 x H 130 mm)	Suitable for storing equipment and tools.
4	1	7141	Perfo Panel Option: Storage Bin Strip (W 450 x H 75 mm) Supplied with 4 x 1 L bins.	For storage of components and small tools.
5	1	7124	4 Drawer Unit (W 525 x D 550 x H 600 mm)	For storage of equipment, tools, documents etc.
6	1	7123	Under bench CPU/Dry Block Calibrator Holder	For storing a dry block calibrator when not in use.

Modules

Item	Qty	Code	Basic Description	Basic Purpose
7	1	8060+	Multifunction Process Calibrator and Control Centre Module Advanced system package for precision source and measure capabilities. Integral process calibrator, 6.5 digit multimeter, PC and EasyCal software. Operation via 12.1 ” touch screen display. Built-in communication with compatible modules.	Source and measure process signals for electrical, frequency, temperature. Enables users to calibrate process instrumentation like transmitters, RTDs, thermocouples and more. EasyCal software and accessories included for automation, administration and certificate generation.
8	1	CCPAD	Control Centre Numeric Keypad Module with jog dial	Provides an ergonomic method of using the control centre module without mouse or keyboard.
9	1	CCSCOPE-2208B	Control Centre Integral Oscilloscope (2 channel) 100 MHz with connection module, control centre operation.	For basic R&M applications, fault finding and diagnostic work.
10	1	CC-AFG20	Control Centre Integral Function Generator 20 MHz with connection module, control centre operation.	Used to generate different types of electrical waveforms over the frequency range, and frequency measurement for fault diagnostics and repair work.
11	1	RMTEG-CV7b/0.02	Digital Pressure Gauge Module with Regulator Vacuum to 7 bar (100 psi), 0.02 % FS accuracy.	For pneumatic calibration work from vacuum to 7 bar (100 psi), commonly used with the 7149 electrical vacuum pump and external air supply (9 bar / 130 psi). Can be used manually with pump also.
12	1	XTEG-G20b/0.02/M	Pressure Measurement Module with Control Centre Interface 0 to 20 bar (300 psi), 0.02 % FS accuracy.	For mid range pneumatic pressure calibration work, used with supplied benchtop pump.
13	1	XTEG-G100b/0.02/M	Pressure Measurement Module with Control Centre Interface 0 to 100 bar (1500 psi), 0.02 % FS accuracy.	For high range pressure calibration work, commonly used with supplied pneumatic pump.
14	1	XTEG-G700b/0.02/M	Pressure Measurement Module with Control Centre Interface 0 to 700 bar (10,000 psi), 0.02 % FS accuracy.	For hydraulic calibration with accompanying 7195 benchtop pump.
15	1	7056	Dual Adjustable DC Power Supply Module 2 x 30 V DC 3 A.	A variable DC supply to supplement various applications.
16	1	7083	Dual 24 V Fixed DC Power Supply Module	For powering loop instrumentation, transmitters and other equipment requiring 24 V DC.
17	1	7088D	Adjustable AC Supply Module with Digital Displays Variable output voltage from 0 to 110% above line input.	Provides variable 50 Hz AC power up to 10 A with two digital meters monitoring the output voltage and current. For general purpose use and R&M applications.

Accompanying Products & Extras

Item	Qty	Code	Basic Description	Basic Purpose
18	1	7149	Electrical Vacuum Pump	Provides a vacuum for pressure modules.
19	1	7149-HCO	Housing & Connectivity Option for 7149 vacuum pump	Compact housing for the 7149 pump, situated under bench. Sound-proofed and power on/off via 7082 module on CalBench.
20	1	7161-VLP	Dual Port Benchtop Manifold with Vernier For Pneumatic use from vacuum to 40 bar (600 psi).	Compact pneumatic manifold that provides two output ports. Hand-tight connectors for pressure instrumentation under test.
21	1	7195	Benchtop Hydraulic Pressure Calibration Pump Vacuum to 700 bar (10,000 psi).	Used for hydraulic pressure calibration with measurement modules.
22	1	7193B	Benchtop Pneumatic High Pressure Calibration Pump Vacuum to 100 bar (1500 psi).	Pressure generation to 100 bar. Used for pneumatic calibration by connecting output ports to module and UUT, then comparing measurements as pressure is applied.
23	1	ADK12	Pressure Calibration Adaptor Kit A kit with a selection of 12 commonly used adaptors.	Provides adaptors for common pressure connections from modules and pumps to UUTs.
24	1	5025E-S2	Benchtop Electrical Multifunction Calibrator AC/DC 1050 V / 22 A, variable resistance, Pt100 simulation, thermocouple simulation, conductance, capacitance, power calibration, 10 MHz digital frequency.	Source & simulation of signals for electrical, electronic, frequency, temperature calibration. Enables users to test and verify process and electrical instruments like sensors, multimeters, clamp meters and more.
25	1	9780	Clamp Meter Adaptor	Used with 5025E to calibrate clamp meters.
26	1	9773	Optical Tacho Adaptor	Used with 5025E to calibrate optical tachometers.
27	1	8072	Dry Block Calibrator (28 to 660 °C) With metric multi hole insert (1x3, 2x4, 1x5, 1x6, 1x9 mm), blank insert, EasyCal software driver pre-configured on control centre.	Temperature source for the calibration of probes, RTDs, and thermocouples. Manual control and EasyCal software compatible to automate calibration applications.
28	1	CERTS	Traceable Calibration Certificates For all test modules and additional test equipment.	Certifies all measurement modules and additional instruments have been tested in the TE factory to international standards.

Downloads

File Name	File Size	Language	Format
CBP-WW4 CalBench Package Data Sheet	600 kB	EN	PDF

CalBench Packages Brochure

11.5 MB

PDF

Features

Pressure Calibration

Electrical Calibration

Temperature Calibration

EasyCal Calibration Software

Details

CalBench Heavy Duty Version (W 2000 x D 850 x H 1568 mm)

Perfo Panel Option: 20 piece Tool Hook Kit

4 Drawer Unit (W 525 x D 550 x H 600 mm)

Under bench CPU/Dry Block Calibrator Holder

Multifunction Process Calibrator and Control Centre Module

Control Centre Numeric Keypad Module with jog dial

Control Centre Integral Oscilloscope (2 channel)

Control Centre Integral Function Generator

Digital Pressure Gauge Module with Regulator

Pressure Measurement Module with Control Centre Interface

Pressure Measurement Module with Control Centre Interface

Pressure Measurement Module with Control Centre Interface

Dual Adjustable DC Power Supply Module

Dual 24 V Fixed DC Power Supply Module

Adjustable AC Supply Module with Digital Displays

Electrical Vacuum Pump

Housing & Connectivity Option for 7149 vacuum pump

Dual Port Benchtop Manifold with Vernier

Benchtop Hydraulic Pressure Calibration Pump

Benchtop Pneumatic High Pressure Calibration Pump

Pressure Calibration Adaptor Kit

Benchtop Electrical Multifunction Calibrator

Clamp Meter Adaptor

Optical Tacho Adaptor

Dry Block Calibrator (28 to 660 °C)

Traceable Calibration Certificates

Downloads

Request a price quote

CBP-WW4 CalBench Package

Related Products

CBP-WW1 CalBench Package

CBP-WW2 CalBench Package

CBP-WW3 CalBench Package

CBP-WW4B CalBench Package